CELLFLEX 7/8" 50 Ohm Coaxial Cable with EIA Flanges
CELLFLEX 7/8" Low-Loss Coaxial Feeder for RF Antennas
CELLFLEX 7/8-inch coaxial cable is a professional 50-ohm RF transmission line designed for efficient signal transfer in broadcasting, telecommunications and antenna feeder installations. Its low-loss foam-dielectric construction and continuous metallic outer conductor provide effective RF shielding and dependable transmission performance over extended cable runs.
The 7/8-inch cable format provides a robust solution for fixed antenna distribution networks, including connections between radio transmitters, RF distribution equipment and antenna systems. Its electrical characteristics support professional installations where controlled attenuation, reliable impedance matching and mechanical durability are important.
7/8-Inch EIA Flange-to-Flange Cable Assembly
The illustrated assembly features 7/8-inch EIA flange terminations at both ends, providing a direct RF interface for compatible equipment and transmission line connections.
The EIA flange connection is selected according to the mating interface and the mechanical requirements of the installation. The CELLFLEX 7/8-inch designation identifies the nominal cable size, while the EIA 7/8-inch designation specifies the connection interface used at the cable ends.
Broadcast and Professional RF Applications
CELLFLEX 7/8-inch feeders are used in professional FM broadcasting, VHF and UHF radio networks, telecommunications infrastructure and wireless antenna systems. Assemblies with EIA flanges provide practical connections for RF equipment designed with corresponding flange interfaces.
Cable selection and installation planning take into account operating frequency, transmitter power, required feeder length, routing conditions and connector compatibility. Correct mechanical support, appropriate bending clearance and suitable protection of outdoor connections contribute to long-term system reliability.
For information about CELLFLEX 7/8-inch coaxial feeders with EIA flange terminations, please contact PROTEL, specifying the required cable length, operating frequency, connector interfaces and installation requirements.
Frequently Asked Questions
What is CELLFLEX 7/8-inch coaxial cable?
CELLFLEX 7/8-inch is a 50-ohm low-loss coaxial feeder used to carry RF signals between professional transmitters, antenna systems and associated equipment.
Which connector configuration is illustrated?
The illustrated cable assembly has 7/8-inch EIA flanges at both ends, commonly described as a flange-to-flange connection.
What is the difference between 7/8-inch cable size and the EIA 7/8-inch interface?
CELLFLEX 7/8-inch refers to the nominal coaxial cable size, while EIA 7/8-inch identifies the RF flange connection interface at the ends of the assembly.
Where are EIA flange-ended CELLFLEX feeders used?
They are used to connect compatible 50-ohm RF equipment and antenna feed networks, including professional FM broadcast installations and other high-power transmission arrangements.
How does feeder length affect RF attenuation?
RF attenuation increases with cable length and operating frequency. Appropriate route planning and cable sizing help maintain the required transmission performance.
How should an EIA flange connection be installed?
Proper flange alignment, compatible mating hardware and appropriate environmental sealing help maintain connection integrity. Installation should follow the connector manufacturer's instructions.