Go to content

Professional 2500 W Complete FM Antenna System 87.5-108 MHz - 4 Directional 3-Element Yagi Antennas - AntennaKit | Professional Antenna Kits 50-600 MHz

Protel Antennaskit.com 38 years - 2026
Antenna
Kit
by
Professional antennas
Skip menu
Skip menu
Menu

Professional 2500 W Complete FM Antenna System 87.5-108 MHz - 4 Directional 3-Element Yagi Antennas

Systems Complete 87 88 108 MHz FM > 2500 W > System four antennas 2500W
Skip menu

Complete professional 2500 W FM antenna system with four directional 3-element Yagi antennas for VHF Band II (87.5-108 MHz). The SC2500-ARYCKM-37X-4 combines four ARYCKM-B-37X antennas, four HF400 RF feed cables and one RIPKM-4B four-way power divider.

The four-branch arrangement provides a coordinated directional antenna array for professional FM broadcasting sites, with the feed cables prepared to the electrical lengths required for the installation.

2500 W Directional FM Broadcast System - Four 3-Element Yagi Antennas

SC2500-ARYCKM-37X-4 - Complete Four-Antenna Directional FM System. A common transmitter feed is distributed to the four antennas through a RIPKM-4B power divider. Each antenna is connected by an individual HF400 cable assembly. The complete system, including its antennas and RF power divider, is designed and manufactured in Italy by PROTEL.

System 4 yagi 3 elements - FM 87-108MHz 1500W - Protel AntennaKit

Complete System Composition

4 × Directional FM 3-Element Yagi Antennas
Model: ARYCKM-B-37X
Antenna RF connector: N female
Maximum RF power per antenna: 700 W
FM operating frequency selection: 87.5-108 MHz
Typical system bandwidth: 3 MHz
Antenna supports: stainless steel
Radiating dipoles and Yagi elements: aluminum or stainless steel

4 × HF400 Antenna Feed Cables
Cut to the required electrical length
RF connectors: N male - N male 90°

1 × Four-Way RF Power Divider
Model: RIPKM-4B
Input: 1 × 7/16 female
Outputs: 4 × N female
Divider RF power rating: 2500 W

System RF power class: 2500 W

Professional Directional FM Broadcasting Applications

The four-antenna configuration can be arranged to develop a directional FM radiation pattern suited to the transmitter site's service-area requirements. Antenna orientation, spacing, polarization and electrical phasing contribute to the characteristics of the combined array.

Typical applications include local and regional FM radio stations, main and auxiliary transmitters, relay stations, secondary broadcast facilities and professional mast, tower or rooftop installations.

Available Antenna Material Versions

(A) ALUMINUM VERSION - ARYCKM-B-37XA: stainless-steel antenna support with aluminum radiating dipole and Yagi elements.

(I) STAINLESS-STEEL VERSION - ARYCKM-B-37XI: stainless-steel antenna support with stainless-steel radiating dipole and Yagi elements.

IMPORTANT - FM OPERATING FREQUENCY

Each complete antenna system is individually tuned to the exact FM operating frequency requested by the customer.

Enter the required operating frequency in the order notes.

The typical operating bandwidth of this four-antenna system is 3 MHz.

Four-Antenna Array Configuration

The four Yagi antennas can be positioned according to the required directional radiation pattern and the available supporting structure. Their relative alignment, mounting positions and feed-cable electrical lengths are coordinated with the intended polarization and installation geometry.

2500 W COMPLETE FM SYSTEM - 4 DIRECTIONAL 3-ELEMENT YAGI ANTENNAS
SC2500-ARYCKM-37X-4
						COMPLETE 2500 W FM ANTENNA SYSTEM - FOUR DIRECTIONAL 3-ELEMENT YAGI ANTENNAS
COMPLETE SYSTEM IN THE FM BAND 87-108 MHz COMPOSED OF:

N°4 Directional Antennas 3 elements Mod. ARYCKM-B-37X (A) Aluminum (I) Stainless Steel
(Stainless-Steel Support)
N°4 HF400 cables cut to the required electrical length, with N male - N male 90° connectors
N°1 Power Divider 1 x 7/16 female / 4 x N female Mod. RIPKM-4B
Limited availability
2500 W COMPLETE FM SYSTEM - 4 DIRECTIONAL 3-ELEMENT YAGI ANTENNAS
CROSS CLAMP
Hot dip galvanized iron
Weight: 1.9 Kg.
Mounting mast Ø 35/114 mm.
Complete of:
SCREWS Ø 10 MA STAINLESS STEEL A2
NUTS Ø 10 MA STAINLESS STEEL A2
Ø 10X20 WASHERS STAINLESS STEEL A2
GROVER CUT Ø 10 STAINLESS STEEL A2
Immediate availability
(VAT excl.) Price without discount49.00 €
RADOME OF PROTECTION
for Antennas from 87 to 108 MHz
RADOME PRESERVES THE “GAMMA MATCH” OF THE ATMOSPHERIC AGENTS LIKE SNOW, ICE AND SALTINESS.
For Antenna Tested and Pre-Assembled
Material: Polyvinyl chloride / PVC
Limited availability
(VAT excl.) Price without discount49.00 €
Product images are for illustrative purposes and may be updated without prior notice.
Immediate availability – subject to confirmation of the requested tuning frequency.
Limited availability – limited quantity currently available, subject to confirmation of the requested tuning frequency.
Out of stock – this product is currently unavailable.

Frequently Asked Questions

What is included in the 2500 W four-antenna 3-element Yagi FM system?

The system includes four ARYCKM-B-37X directional 3-element Yagi antennas, four HF400 cables cut to the required electrical length with N male - N male 90-degree connectors, and one RIPKM-4B four-way RF power divider.

How do I specify the FM operating frequency when ordering?

Enter the exact FM operating frequency within 87.5-108 MHz in the order notes. Each complete antenna system is individually tuned to the frequency requested by the customer.

What is the bandwidth of this four-Yagi antenna system?

The ARYCKM-B-37X antenna family has a typical bandwidth of 3 MHz. This complete system is specified with a corresponding typical bandwidth of 3 MHz and is tuned to the selected operating frequency.

Which antenna materials are available?

Both versions use stainless-steel antenna supports. ARYCKM-B-37XA has aluminum radiating dipoles and Yagi elements, while ARYCKM-B-37XI has stainless-steel radiating dipoles and Yagi elements.

How does RIPKM-4B feed the four antennas?

The RIPKM-4B four-way RF power divider has one 7/16 female input and four N female outputs. Each output feeds an ARYCKM-B-37X antenna through an HF400 cable. The divider is rated at 2500 W, and each antenna is rated at up to 700 W.

Where is a four-antenna directional FM array used?

Typical applications include local and regional FM radio stations, main and auxiliary transmitter sites, relay stations, and professional tower or rooftop installations. The radiation pattern depends on antenna orientation, spacing, polarization, RF phasing, and installation geometry.

Image Protel
PROTEL Antennas via Magellano 3 A/B 6
20090 CESANO BOSCONE -MILANO- Italy
Tel +39.02.48600265 Fax +39.02.48600871
P.I. 09497700154 - REA 1296350
Copyright Protel 1988-2026
All right riserved
Back to content